- Digital Peristaltic Pump
• Use an elastic tube
• Convey a certain amount of liquid continuously by rotating the roller
• conveyed quantity of liquid is determined by tubing size and motor rpm
• Can use the rotating direction of the motor to clockwise or counter-clockwise
• Able to install Masterflex® Easy Load®, Easy Load®II
• Can connect 4 heads (depending on tubing)
• LK Labkorea
| Cat. No | Model | Flow Rate | Speed |
|---|---|---|---|
| P06-602-050 | TPT6035 | 0.06 ~ 2900 ml/min | 0.1 ~ 600 rpm |
-
• Component: Programmable Drive 1ea, Pump Head (TPH-1000) 1ea
• Can be set to 0.1 rpm range from 0.1~100 rpm, set to 1 rpm range from 100~600 rpm (can be set in up to 50 rpm)
• Can interlock the water leak detection sensor (Leak Detector)
• Can choose the power failure recovery function (Use Auto Start Function after recovery of power failure)
| Tubing Size | LS13 | LS14 | LS16 | LS25 | LS17 | LS18 |
|---|---|---|---|---|---|---|
| ID | 0.8 | 1.6 | 3.1 | 4.8 | 6.4 | 7.9 |
| Flow Rate (ml/min) | 0.06 ~ 36 | 0.21 ~ 130 | 0.8 ~ 480 | 1.7 ~ 1000 | 2.8 ~ 1700 | 3.8 ~ 2300 |
| Max. Pressure | 2.7 bar | 2.4 bar | 1.4 bar | 1.0 bar | ||
| Cat. No | Model | Flow Rate | Touch Screen |
|---|---|---|---|
| P06-602-160 | TPE3043 | 0.01 ~ 3400 ml/min | 5.6" |
-
• Component: Programmable Drive 1ea, Pump Head (TPH-1000) 1ea
• Pump Master Software : Possible to simultaneous-control up to 8 pumps and real-time data logging(option)
• Can connect 4 heads (depending on tubing)
• Can connect the water leak detection sensor (Option) : alarm and stopping motion function
Optional Accessory
Spare Pump Head| Cat. No | Model | Description |
|---|---|---|
| P06-602-500 | TPH-1000 | For LS13, LS14, LS25, LS17, LS18 |
- • can compatible with Masterflex Pump Head
| Cat. No | Model | Description |
|---|---|---|
| P06-602-610 | LD-TP | Liquid Leak Detector |
| P06-602-620 | LPP-TP | Leak-Proof Pad without Sensor |
| Cat. No | Model | Pump Head | Pump Head |
|---|---|---|---|
| P06-602-950 | 980065 | 2 ea | TPH-1000 |
| P06-602-953 | 980069 | 3 ea | |
| P06-602-956 | 980072 | 4 ea |
| Cat. No | Model | Description |
|---|---|---|
| P06-602-721 | 980089 | Lock Type Foot Switch |
| Cat. No | Model | Description |
|---|---|---|
| P06-602-600 | 980055 | Software - Possible to simultaneous control up to 8 pumps |
| P06-602-723 | 980090 | Lock Type Foot Switch |
| Cat. No | P06-602-050 | P06-602-160 |
|---|---|---|
| Model | TPT6035 | TPE3043 |
| Motor Type | Stepping Servo Motor | Stepping Servo Motor |
| Speed | 0.1 ~ 600 rpm | 0.01 ~ 600 rpm |
| Flow Capacity | 0.06 ~ 2900 ml/min (Full Range) | 0.01 ~ 3400 ml/min (Full Range) |
| Accuracy | - | ± 2% of FSR or Better |
| Motor voltage Pressure / Electric Current | - | DC24V ± 10%/3.4A |
| Using Temperature / Conservation Temperature | 0 ~ 50℃ / - | 0 ~ 40℃ / -20 ~ 60℃ (Condensation caution) |
| Housing Material | ABS Case / PET liquid crystal protection film | |
| Proper humidity | 80%RH under | 90%RH under |
| Operating System | - | Embedded System |
| Display | 4 Digit LED Display (RPM or Timer) | 5.6" Touch Screen |
| Power | 220 ~ 240V, 60Hz | |
| Size | 180×264×200 mm (Excluding pump head) | 210×260×270 mm (Excluding pump head) |
| External Interface | - | RS-485 (Modbus-RTU) |
| External Control – Pressure | Start/Stop,
CW/CCW, Speed(4~20mA or 1~5V), Leak Sensor |
Start/Stop, CW/CCW, PRIME, 4 ~ 20mA (option) |
| Operating Mode | RPM : 0.1 ~ 600, Timer : 00:01 ~ 99:59 | Flow Rate / Volume / Time / RPM |
