.jpg)
.jpg)
.jpg)
.jpg)
- Circulating Oil Bath
• Maintaining uniform temperature inside the bath with inner circulation function
• Suitable for use together with other instruments with a powerful circulation pump
• 10 steps pump power (flow rate) controller
• Precision control Implementation by 0.01°C
• Cooling coil can be installed on request (able to drop the temperature fast
by circulating coolant from the outside)
• Installed drain tap easier to drain the solution from the inside of the bath
• Installed ports for external sensor and RS485 for PC communication
(communication program can be downloaded on www.lklab.com)
• Simple and intuitive user interface with graphic LCD display
• Auto tuning and temperature calibration function installed
• 2 type timer function installed; start at the same time as driving or start after reaching the target temperature
• Automatic fault sensing system; bath itself can detect an unusual situation (patent registration)
• Low water alarm for heater’s overheating avoiding due to lack of liquid inside a bath
• Double overheat safety device ‒ 1st controller overheat alarm, 2nd overheat shut off a circuit
• LK Labkorea
| Cat. No | Model | Type | Capacity |
|---|---|---|---|
| B04-01-050 | COB10 | PID Control | 10 L |
| B04-01-060 | COB20 | 20 L | |
| B04-01-070 | COB30 | 30 L |
| Cat. No. | B04-01-050 | B04-01-060 | B04-01-070 | |
|---|---|---|---|---|
| Model | COB10 | COB20 | COB30 | |
| Capacity | 10 L | 20 L | 30 L | |
| Controller | Control | PID Control, Auto-tuning | ||
| Display | GLCD (Graphic LCD) | |||
| Resolution | 0.01℃ | |||
| Timer | Run start / Wait start (99 hr 59 min) | |||
| Temperature | Range | Ambient +10℃ to +250℃ | ||
| Accuracy at 100℃ | ±0.3℃ | |||
| Uniformity at 100℃ | ±0.42℃ | ±0.85℃ | ±1.23℃ | |
| Pump | Capacity | 22 L/min (at water 25℃) | ||
| Pressure | 0.47 bar / 6.8 psi (at water 25℃) | |||
| Size | Interior | w240×d300×h150 mm | w250×d450×h180 mm | w300×d450×h230 mm |
| Exterior | w310×d370×h425 mm | w320×d520×h465 mm | w370×d520×h505 mm | |
| Top Open | w240×d130 mm | w250×d270 mm | w320×d270 mm | |
| Material | Interior | Stainless Steel 304 | ||
| Exterior | Powder Coated Steel | |||
| Electric Supply |
Power | 1 Phase, 220 VAC, 50/60 Hz | ||
| Max Consumption | 1.1 kW (5 A) | 2.1 kW (9.6 A) | 2.8 kW (12.8 A) | |
| Power Line | Standard Plug | |||
| Other | Drain | 1/4” Hose Nipple Male | ||
| Circulating IN / OUT | 1/2” Stainless Steel Tubing | |||
| Safety | Over Temp. & Current Protection, Automatical Fault Sensing System | |||
| Cat. No | Model | Description |
|---|---|---|
| B04-01-085 | LI-USB | RS485 to USB Communication Cable |
| B04-91-483 | ET101M | External Sensor, Pt100, Ø4xL300mm |
| C20-184-035 | S050-U | 1/2" Stainless Steel Tubing Connector |
