• Forced Convection Oven

• Uniform Temperature Distribution by Forced Convection of Heat Flow
• Fan Stopping Function with Door Open for Minimize Temperature Change(Considering Safety of Operator)
• Observation Inside through Triple Tempered Glass Window without Door Open
• Upper Vent Hole for Venting Gases
• Installation of RS485 PC Communication Device
• Automatical Fault Sensing System (By itself can detect an unusual situation.)
• Double Overheat Safety Device - 1st Controller Overheat Alarm, 2nd Overheat Shut Off Circuit
• Simple and Intuitive User Interface with Graphic LCD Display
• Auto Tuning and Temperature Calibration Function Installed
• 5 Step Flow Control Prevent Spreading Sample
• Programmable Controller
- Available to Set Operating Control Time for Temp. Increasing, Maintaining and Decreasing
- Available to Prevent Temperature Overshoot and Precision Temperature Control
- Available to Set and Repeat 2 Patterns / 18 Segments Program
• LK Labkorea

Cat. No Model Type Capacity
O01-02-045 LO-US280S PID Control 360 L
O01-02-047 LO-US300S 588 L
O01-02-055 LO-US280P Program Control 360 L
O01-02-057 LO-US300P 588 L
Cat. No. O01-02-045 O01-02-047 O01-02-055 O01-02-057
Model LO-US280S LO-US300S LO-US280P LO-US300P
Capacity 360 L 588 L 360 L 588 L
Controller Control PID Control Program Control
Display GLCD (Graphic LCD)
Resolution 0.01℃
Timer Run start / Wait start (99 hr 59 min)
Fan Speed 1 ~ 5 Step
Temperature Range Ambient +10 ~ +250℃
Accuracy at 100℃ ±0.3℃
Uniformity at 100℃ ±1.8℃ ±2.2℃ ±1.8℃ ±2.2℃
Size Interior (mm) w600×d600×h1000 mm w700×d700×h1200 mm w600×d600×h1000 mm w700×d700×h1200 mm
External (mm) w740×d875×h1470 mm w840×d975×h1670 mm w740×d875×h1470 mm w840×d975×h1670 mm
Material Interior Stainless Steel 304
Exterior Powder Coated Steel



Power 1 Phase, 220Vac, 50/60 Hz
Max Consumption 3.6kW(16.4A) 5.2kW(23.7A) 3.6Kw(16.4A) 5.2Kw(23.7A)
Power Line Industrial Plug
Other Wire Shelf 4 ea
Vent Hole Φ38 mm×2 ea
Caster Leveling Caster
Safety Over Temp. & Current Protection, Automatical Fault Sensing System
Validation Service
Cat. No Model Description
O01-91-999 VA-FO100 Validation for Oven
  • ● 당사 기본 양식에 따른 IQ/OQ Validation Service 비용이며, 고객 요청에 의하여 비용이 변경되어 질 수 있음
Optional Accessory
Cat. No. Model Type
O01-96-100 SI300 Sign Tower Lamp
B04-01-085 LI-USB RS485 to USB Communication Cable
O01-02-421 LO-USSH01 Spare Wire Shelf for 360 L
O01-02-423 LO-USSH02 for 588 L
O01-02-431 LO-USSH11 Optional Perforated Plate Shelf for 360 L
O01-02-433 LO-USSH12 for 588 L