• High Temp. Forced Convection Oven

• Uniform Temperature Distribution by Forced Convection of Heat Flow
• Fan Stopping Function with Door Open for Minimize Temperature Change(Considering Safety of Operator)
• Highly Thermal Resistant Ceramic Packing Applied
• 50T Ceramic Temperature can be Raised Quickly through Insulation and High Heat Capacity
• 5 Step Flow Control Prevent Spreading Sample
• Installation of RS485 PC Communication Device
• Automatical Fault Sensing System (By itself can detect an unusual situation.)
• Double Overheat Safety Device - 1st Controller Overheat Alarm, 2nd Overheat Shut Off Circuit
• Simple and Intuitive User Interface with Graphic LCD Display
• Auto Tunning, Temperature Calibration Available
• 2 type of Timer Function Installed
• Programmable Controller
- Available to Set Operating Control Time for Temp. Increasing, Maintaining and Decreasing
- Available to Prevent Temperature Overshoot and Precision Temperature Control
- Available to Set and Repeat 2 Patterns/20 Segments Program
• LK Labkorea





Untitled Document

Cat. No Model Type Capacity
O01-02-065 LO-HS480 PID Control 100 L
O01-02-073 LO-HS600 150 L
O01-02-067 LO-HP485 Program Control 100 L
O01-02-075 LO-HP605 150 L
Cat. No. O01-02-065 O01-02-073 O01-02-067 O01-02-075
Model LO-HS480 LO-HS600 LO-HP485 LO-HP605
Capacity 100 L 150 L 100 L 150 L
Controller Control PID Control Program Control
Display GLCD (Graphic LCD)
Resolution 0.1℃
Timer Run start/Wait start(99 hr 59 min)
Fan Speed 1 ~ 5 Step
Temperature Range Ambient +15 ~ +350℃
Accuracy at 100℃ ±0.3℃
Uniformity at 100℃ ±2.3℃ ±3.7℃ ±2.3℃ ±3.7℃
Size Interior (mm) w480×d400×h520 mm w600×d500×h520 mm w480×d400×h520 mm w600×d500×h520 mm
External (mm) w670×d675×h930 mm w790×d710×h930 mm w670×d675×h930 mm w790×d710×h930 mm
Material Interior Stainless Steel 304
Exterior Powder Coated Steel

Electric

Supply

Power 1 Phase, 220Vac, 50/60 Hz
Max Consumption 2.5 kW (11.3 A) 3.1 kW (14.1 A) 2.5 kW (11.3 A) 3.1 Kw (14.1 A)
Power Line Standard Plug
Other Wire Shelf 2ea
Vent Hole Φ38 mm×2 ea
Safety Over Temp. & Current Protection, Automatical Fault Sensing System
Validation Service
Cat. No Model Description
O01-91-999 VA-FO100 Validation for Oven
  • ● 당사 기본 양식에 따른 IQ/OQ Validation Service 비용이며, 고객 요청에 의하여 비용이 변경될 수 있음
Optional Accessory
Cat. No. Model Type
O01-96-100 SI300 Sign Tower Lamp
B04-01-085 LI-USB RS485 to USB Communication Cable
O01-02-441 LO-HSSH01 Spare Wire Shelf for 100 L
O01-02-443 LO-HSSH02 for 150 L
O01-02-451 LO-HSSH11 Optional Perforated Plate Shelf for 100 L
O01-02-453 LO-HSSH12 for 150 L