• Muffle Furnace

• LK Labkorea





  • PID Controller
Cat. No Model Capacity Control
F08-02-110 LF-MS230 3 L PID Control
F08-02-120 LF-MS350 4.5 L
F08-02-130 LF-MS513 12 L
F08-02-133 LF-MS550 14 L
F08-02-135 LF-MS627 27 L
  • • Suitable for researching with drying, plasticity, batch, measuring, new material, and ceramic sintering
    • Preventing damage to the heater from the contact of vapor and corrosive gas by installing a fireproof molded heating element
    • Installed duct hole for exhaust gas and vapor inside
    • Simple and intuitive user interface with graphic LCD
    • Installed port for RS485 for PC communication
    • Auto tuning and temperature calibration available
    • Two types of timer functions installed (start at the same time as driving or start after reaching target temperature)
    • Automatic fault sensing system (by itself can detect an unusual situation)
    • Double overheat safety device - 1st controller overheat alarm, 2nd overheat shut off a circuit
    • Digital over-temperature safety device
    • Industrial plug applied for models LF-MS513, LF-MS550, LFMS627 ‒ Need to check before purchase

  • Program Controller
Cat. No Model Capacity Control
F08-02-140 LF-MS230P 3 L Program Control
F08-02-150 LF-MS350P 4.5 L
F08-02-160 LF-MS513P 12 L
F08-02-173 LF-MS550P 14 L
F08-02-175 LF-MS627P 27 L
  • • Suitable for drying, firing, ash measurement, new materials, and ceramic sintering experiments
    • Use of special fireproof molding heaters to prevent damage to the heater by blocking contact with steam and corrosive gases etc.
    • Default installation of duct holes for internal steam and gas exhaust
    • Graphic Display, Simple, and Intuitive Controller Operation
    • Provides RS-485 PC communication capabilities (Download the program from our website)
    • Auto-tuning and temperature calibration functions
    • Two types of timers. Start at the same time as the drive, start after reaching the target temperature
    • Automatic Fault Sensing System - Device Monitors Abnormalities on its own (Patent registration)
    • Double Over Temperature Safety Unit, Primary Controller Over Temperature Alarm, and Secondary Over Temperature Blocking Circuit
    • Digital overheating shut-off device
    • Program Control
    - Store and select multiple stages of temperature rise and hold times to operate
    - Enables temperature overshoot suppression and precise control
    - 2 Patterns, 18 Segments of programs can be set
    • Industrial plug applied for models LF-MS513, LF-MS550, and LFMS627 - Need to check before purchase

  • Technical Data
Cat. No. F08-02-110 F08-02-120 F08-02-130 F08-02-133 F08-02-135
Model LF-MS230 LF-MS350 LF-MS513 LF-MS550 LF-MS627
Capacity 3 L 4.5 L 12 L 14 L 27 L
Controller Control PID Control, Auto-tuning
Display GLCD (Graphic LCD)
Resolution 1℃
Timer Run start / Wait start (99 hr 59 min)
Cat. No. F08-02-140 F08-02-150 F08-02-160 F08-02-173 F08-02-175
Model LF-MS230P LF-MS350P LF-MS513P LF-MS550P LF-MS627P
Capacity 3 L 4.5 L 12 L 14 L 27 L
Controller Control Program Controller
Display GLCD (Graphic LCD)
Resolution 1℃
Program 2 Pattern 18 Segment
Temperature Range Max. 1100℃ (Continuous Using Temperature 1000℃)
Size (mm) Internal w130×d250×h90 w150×d300×h100 w200×d300×h200 w250×d350×h160 w300×d300×h300
External w380×d470×h575 w390×d520×h585 w450×d520×h690 w500×d570×h650 w550×d540×h785
Duct Ø12
Material Internal Ceramic Fiber Board
External Powder Coated Steel
Electric
Supply		 Power 1 Phase, 220 Vac, 50/60 Hz
Max
Consumption		 1.8 kW (8.1 A) 2.8 kW (12.8 A) 4.5 kW (21 A) 5 kW (22.8 A) 6 kW (27.2 A)
Power Line Standard Plug Industrial Plug
Safety Over Temp. & Current Protection, Automatical Fault Sensing System

  • Optional Accessary
Cat. No Model Description
F08-101-980 41103 High Temp. Glove Max. 600℃
F08-101-990 41101 High Temp. Glove Max. 900℃